www.dragino.com
LPS8 LoRaWAN Gateway User Manual 49 / 55
8 Upgrade Linux Firmware
We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the
links for reference.
➢ Latest firmware: LoRa Gateway Firmware,
( http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware )
➢ Change Log: Firmware Change Log.
( http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-
OLG02/Firmware/ChangeLog )
The file named as xxxxx–xxxxx-squashfs-sysupgrade.bin is the upgrade Image. There are
different methods to upgrade, as below.
8.1 Upgrade via Web UI
Go to the page: Web → System → Firmware Upgrade
Select the required image and click Flash Image. The image will be uploaded to the device, and
then click Process Update to upgrade.
NOTE: You normally need to uncheck the Preserve Settings checkbox when doing an upgrade to
ensure that there is no conflict between the old settings and the new firmware. The new
firmware will start up with its default settings.
The system will automatically boot into the new firmware after upgrade.
To Next Page
Loading...
