Vigor2910 Series User’s Guide
198
Settings in the remote host:
1. For Win98/ME, you may use "Dial-up Networking" to create the PPTP tunnel to Vigor
router.
For Win2000/XP, please use "Network and Dial-up connections" or “Smart
VPN Client”, complimentary software to help you create PPTP, L2TP, and L2TP over
IPSec tunnel. You can find it in CD-ROM in the package or go to www.draytek.com
download center. Install as instructed.
2. After successful installation, for the first time user, you should click on the Step 0.
Configure button. Reboot the host.
3. In Step 2. Connect to VPN Server, click Insert button to add a new entry.
If an IPSec-based service is selected as shown below,
To Next Page
Loading...
