Vigor300B Series User’s Guide
119
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Group Name
Type the name of the service type object group. The number
of the characters allowed to be typed here is 20.
Group Name
Type the name of the service type object group. The number
of the characters allowed to be typed here is 20.
Objects
Use the drop down list to check the service type object
profiles under such group.
All the available service type objects that you have added on
Objects Setting>>Service Type Object will be seen here.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all the settings and click Apply.
5. A new Service Type Group profile has been created.
To Next Page
Loading...
