Draytek Vigor300B User Manual

Vigor300B Series User’s Guide
90
Enable This Profile
Check the box to enable the Address Mapping profile.
WAN Profile
Choose a WAN profile for such entry.
Private IP
Type the private IP used for this entry.
Private IP subnet
Mask
Type the subnet mask used for this entry.
Protocol
Choose the protocol used for the entry.
Use IP Alias
Click Enable to invoke IP Alias function.
IP Alias
IP alias that can be selected and used for port redirection.
Before using it, please go to WAN>>General Setup and
enable the wan1 profile. Add several IP addresses under
Static mode for wan1.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all the settings and click Apply.
5. A new profile has been added onto Address Mapping table.

Draytek Vigor300B Specifications

General

Brand	Draytek
Model	Vigor300B
Category	Wireless Router
Language	English