VigorAP 700 User’s Guide
1
Chapter I: Product Information
1-1 Introduction
Thank you for purchasing this VigorAP 700! With this high cost-efficiency VigorAP 700,
computers and wireless devices which are compatible with 802.11n can connect to existing
wired Ethernet network via this VigorAP 700, at the speed of 300Mbps.
Easy install procedures allows any computer users to setup a network environment in very short
time - within minutes, even inexperienced users. Just follow the instructions given in this user
manual, you can complete the setup procedure and release the power of this access point all by
yourself!
Other features of this access point including:
z Compatible with IEEE 802.11b/g/n wireless network standard - works with other
802.11b/g/n wireless devices.
z High speed wireless network, six times faster than conventional 802.11g wireless
network (up to 300Mbps).
z Allow wireless devices to connect to existing wired network and share network
resources.
z Supports DHCP server function.
z Supports 64/128-bit WEP, WPA, and WPA2 wireless data encryption.
z Supports MAC address filtering (Only allow specific wireless device of your choice to
connect to this access point).
z Supports RADIUS server, only allow users listed in your authorization server to use
wireless network.
z Supports WPS (Wi-Fi Protected Setup), simplifies wireless client setup procedures. Even
inexperienced user can setup wireless network without network technician’s help!
z Easy to use web-based GUI (Graphical User Interface) for network configuration and
management purposes.
To Next Page
Loading...
Need help?
General
