14
EN
Care & Maintenance
Clean the Roller Brush
1. Pull up the left handle of the roller
brush and take it out.
2. Use the included cleaning brush to
remove hairs and debris that get stuck
in the roller brush and rinse it with
clean water. The roller brush must be
thoroughly dried before use.
3. Wipe the dust from the dust intake with
a dry cloth or paper towel. Never rinse it
with water.
4. After cleaning is completed, align the
right end of the roller brush with the
right slot on the vacuum and push the
left end into the left slot on the vacuum
until it clicks into place.
* Clean it as needed, it is recommended to replace it
every 3 to 6 months.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
