Dreame H12 Core Manual

53
54
EN
EN
port on the top of the appliance as
Installation
Installing the Handle
Insert the end of the handle vertically into the
indicated until you hear a click.
hole on the back of the appliance to press in Note: To disassemble, extend a hard object into the the
contacts and pull the handle upwards at the same time.
Click
Charging
Note: Fully charge the appliance before
1. Place the charging base on the
power adapter to the charging
using it for the first time.
level ground against a wall. Connect one end of the
base and another end to a home socket.
charging base, the Pla
2.
Place the appliance on thece the appliance on the charging bas
the charging status. The number on the display screen represents the current battery
charging. When the number is at 100, the battery is fully
is fully charged, the indicator will turn off after10
level in a percentage during
charged. Once the appliance
seconds.
Note:
• The screen will be off in 5 minutes while the appliance is fully charged. If no operation is performed
within 10 minutes, the appliance will turn off.
• To extend the battery life time, the battery keeps cooling down for about one hour automatically
after you have used the appliance for a long time.

Dreame H12 Core Specifications

General

Battery Capacity	4000 mAh
Clean Water Tank Capacity	900 ml
Dirty Water Tank Capacity	500 ml
Display	LED
Self-Cleaning	Yes
Power	200 W
Type	Cordless Wet and Dry Vacuum Cleaner
Dustbin Capacity	Not applicable
Cleaning Modes	Auto, Max
Run Time	35 minutes
Charging Time	4-5 hours