Dreame H12 Core User Manual

9
EN
Charging
Note: Fully charge the appliance before using it for the 󶀄rst time.
1. Place the charging base on the level ground against a wall. Connect one end of the
power adapter to the charging base and another end to a home socket.
2. Place the appliance on the charging base, the on the screen lights up to indicate
the charging status. The number on the display screen represents the current battery
level in a percentage during charging. When the number is at 100, the battery is
fully charged. Once the appliance is fully charged, the indicator will turn o󶀃 after10
seconds.
Note:
•
The screen will be o󶀃 in 5 minutes while the appliance is fully charged. If no operation is
performed within 10 minutes, the appliance will turn o󶀃.
•
To extend the battery life time, the battery keeps cooling down for about one hour automatically
after you have used the appliance for a long time.

Dreame H12 Core Specifications

General

Battery Capacity	4000 mAh
Clean Water Tank Capacity	900 ml
Dirty Water Tank Capacity	500 ml
Display	LED
Self-Cleaning	Yes
Power	200 W
Type	Cordless Wet and Dry Vacuum Cleaner
Dustbin Capacity	Not applicable
Cleaning Modes	Auto, Max
Run Time	35 minutes
Charging Time	4-5 hours