Dreame H12 Core - Cleaning the Brush Roller

14
EN
Cleaning the Brush Roller
1.Press the brush roller release
buttonandthe handle of the brush
roller will pop out. Pull the handle to
take out the brush roller.
2. Clear any hair and debris caught
on the brush roller with the provided
cleaning brush. Rinse the brush roller
with clean water and dry it completely.
3. Wipe the suction inlet with a dry
dishcloth or wet tissue.
4. Re-install the brush roller. You should
hear a click.
Note: Clean as needed. Replacing the 󶀄lter every 3 to 6 months is recommended.
Warning: To reduce the risk of electric shock or injury, do not rinse theroller brush
assemblywith water!
Care & Maintenance