12
EN
Care & Maintenance
One-Click Self-Cleaning
1. Place the appliance back onto the base while you nish cleaning.
2. Briey press the self-cleaning button on the top of the handle
tostart/stop self-cleaning.
3. Empty the Used Water Tank while self-cleaning is completed.
Note: The self-cleaning mode can be enabled only
when the appliance is being charged and the battery
level is more than 20%.
Tips:
• Turn o the appliance before maintenance. Do not touch the power switch.
• Replace parts if needed. The parts must be replaced by those available from the
manufacturer or its service agent.
• If the appliance is not used for an extended period, fully charge it, unplugthe power
plug, and store the appliance in a cool, low-humidity environment away from direct
sunlight. To avoid over-discharge of the battery, charge the appliance at least once
every 3 months.