Dreame H12 S User Manual

14 15
1
2
咔哒
1
2
1. Press the used water tank release
button, and pull the used water tank
outwards to take it out.
Care & Maintenance
Cleaning the Used Water Tank
*Cleaningthe used water tank after each use and before and after enabling the self-cleaning
functionis recommended.
2. Hold the used water tank and remove
the tank cover. Pour out the wastewater.
Used
Water Tank
Cover
3. Rinse the used water tank and tank
cover with clean water. Clean the inner
wall of the tank with the provided
cleaning brush.
4. After the cleaning is completed, close
the tank cover, snap the bottom of the
tank into the support position of the
vacuum, and gently push the tank until
you hear a click.
Click
1
2
1
2
Care & Maintenance
Cleaning the Brush Roller
1. Press the brush roller release button,
and the brush roller handle pops out.
Pull it to take out the brush roller.
2. Clean outanyhair and debris
tangled on the brushrollerwith the
provided cleaning brush. Rinse the
brushrollerwith clean water and dry it
completely.
3. Wipe the suction inlet with a dry cloth
or wet tissue. Do not rinse the brush
assembly with water.
4. After cleaning the brush roller , align
and pushtheright end into the right slot
on the brush assembly and press the
brush roller handle into the left slot on
the brush assembly.
* Clean it as needed. Replacing every 3 to 6 months is recommended.

Dreame H12 S Specifications

General

Brand	Dreame
Model	H12 S
Category	Vacuum Cleaner
Language	English