10
Cleaning the Brush Cover
Press both brush roller cover release buttons inward to remove the cover.
Rinse the brush cover with clean water or wipe it with a dishcloth. Ensure it is
completely dry before reusing.
Cleaning the Brush Roller
Press the button to release the brush roller handle and then pull it out.
To clean the brush roller, use the cleaning brush provided to remove any hair or
debris. Rinse the roller with clean water and ensure it is completely dry.
Clean the suction inlet with a dry dishcloth or wet tissue.
Re-install the brush roller until you hear a click.
Warning: To reduce the risk of electric shock or injury, do not rinse the roller brush
assembly with water!
Note: It is recommended to replace the filter every three to six months and clean it as
necessary.
Cleaning the Used Water Tank and the Filter
Press the release button for the Used Water Tank to detach the tank.
Extract the filter from the cover of the Used Water Tank. Uncover the tank and
empty the used water.
Rinse both the Used Water Tank and its cover with clean water. Utilize the supplied
cleaning brush to thoroughly clean the tank.
Reattach the filter and the cover of the Used Water Tank. Then, securely reinstall
the Used Water Tank until you hear a distinct click.
Note:
If the filter becomes dirty and requires cleaning, rinse it with water. Ensure it is
thoroughly dry before using it again.
It is advisable to replace the filter every three to six months.
Cleaning the Tube and the Dirt Sensor
Take out the Used Water Tank. Prior to usage, wipe the tube and the dirt sensor
with a damp cloth.
To Next Page
Loading...
