DriSteem XTP 003 - Dimensional Drawings

5
XT SERIES INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
Notes:
* Fill cup extension (Figure 5-1) is required for the following:
- All XT Series humidifi ers using Ultra-sorb or Rapid-sorb
- When developed length of steam tubing is more than 20' (6 m)
and duct static pressure exceeds 2" wc (498 Pa)
• Labeled dimensions: inches (millimeters).
• See mounting dimensions in Figure 9-1.
Models XTP 002 through 048
E
D
Electrical knockout
Top
Bottom
Front
Drain outlet
Electrical
knockouts
Supply water
connection
B
OM-7672
10.0 (254)
Fill cup extension kit*
OM-7673
D
B
E
F
Models XTP 050 through 096
10.0 (254)
21.0 (533)
Dispersion outlets
Drain outlets
Supply water connections
Fill cup extension kits*
A
A
C
C
F
Front
Top
Bottom
Electrical knockout
Dispersion outlet
E
E
Electrical
knockouts
21.0 (533)
15.1 (384)
D
D
G
G
Dimensional drawings
SPECIFICATIONS
FIGURE 5-1: XT SERIES HUMIDIFIER DIMENSIONAL DRAWINGS