Drive 14030 - Specifications

17
Control Unit
Item: 14030XP
Power supply: 120V/60Hz
Air output: 12 liter/min
Pressure range: 20-60 mmHg
Cycle time: 15/20/25/30 min.
Case Material: Flame Retardant ABS
Information Signal: Low pressure
Alternate/Static Mode
Size: 14.5”(L) x 5”(W) x 10”(H)
Weight: 10 lbs
FUSE: 1A 250V
Note
The above specications are also applicable to those areas operating with the same power supply range.
The Med Aire Plus 10” Mattress Replacement system has been tested and certied for the following
standards:
• UL
• c-UL
• UL 60601-1
• CAN/CSA C22.2 No. 601.1
• IEC60601-1-11
Y.Sung Handelvertretung
Duesselthaler St. 24, 40211 Duesseldorf,
Deutschland, Germany
SPECIFICATION
Mattress
Item: 14030MN, 14048MN, 14054MN, 14060MN
Size: 42” W x 80” L x 10” H (14030 model)
48” W x 80” L x 10” H (14048 model)
54” W x 80” L x 10” H (14054 model)
60” W x 80” L x 10” H (14060 model)
Top cover: Quilted Nylon / PU coating quilted stretch with zipper
Air cells: Nylon / PU Lamination
Base: 800D Nylon/PVC
Quantity & Height of Air Cells: 20 EA x 10” air cells:
- Cell on Cell Design prevents “bottoming out” and provides
up to 24 hours of power outage protection
- CPR valve for emergency procedures
- Pillow function and low air loss
- Quick connectors
Maximum Weight Capacity: 600 lbs (14030), 750 lbs. (14048),
1,000 lbs. (14054 & 14060)