Drive 14030 - Product Features; Control Unit

7
The Med Aire Plus 10” mattress replacement system is comprised of two components:
1) Therapy air cell mattress replacement with 10” high air cells and static 5” air cell base
2) Therapy control unit
The Med Aire Plus 10” control unit is available in one conguration:
Control Unit 14030XP: Digital System
Control Unit (Figure 1)
Figure 1
• This digital control unit includes intuitive controls for adjusting the air pressure based on the patient’s
weight and comfort levels.
• Static button is available to discontinue alternation therapy for patient transfers, caregiving, comfort, or
preference.
• Low pressure, power failure and system failure indicators allow the user to be aware of any air pressure
changes, power outages or system malfunctions, respectively.
• Mute button available for silencing information signal.
• Seat inate increases air pressure for additional sacral support during head of bed (HOB) elevation.
• Cycle times are available to customize the therapy duration.
• Max rm is available for patient transfers or other patient care procedures.
PRODUCT FEATURES