How to fix DRTECH EVS3643W that failed to turn on?
If your DRTECH Medical Equipment fails to turn on, first ensure the battery pack is correctly installed. If it still doesn't power on, charge the battery pack. Try replacing the battery pack, and if the problem persists, test with another detector to identify if either the battery pack or detector is faulty. If necessary, replace the corresponding devices.
Why DRTECH EVS3643W Medical Equipment performance decrease caused by usage of long time?
If you observe a performance decrease in your DRTECH Medical Equipment due to prolonged use, it might be because the battery pack's consumption is too fast. If the battery pack has been used for a long time, replace it with a new one. Also, avoid using the battery pack in low-temperature environments; instead, use it in a normal room.
General| Model | EVS3643W |
|---|---|
| Brand | DRTECH |
| Pixel Pitch | 140 μm |
| Spatial Resolution | 3.5 lp/mm |
| Active Area | 36 cm x 43 cm |
| A/D Conversion | 16 bit |
| Data Output | Gigabit Ethernet |
| Dimensions | 384mm x 460mm x 15mm |
| Scintillator | Cesium Iodide (CsI) |
To Next Page
