Be sure to use only the specified power supply dedicated for the Product.
Veillez à n'utiliser que l'alimentation appropriée du détecteur produit.
Wireless Connection
EVS W series transmits images and data by wireless communication.
Battery pack should be installed in the detector to use it under the wireless
configuration.
Up to 2 battery packs can be charged simultaneously from a battery charger.
Wired Connection
Connect EVS W Series and PC with a tether interface and functional cable to make a
wired configuration.
Although the functional cable supplies power, a battery pack is needed to be installed in
the detector.
Data communications are faster than wireless connection.
It is possible to charging a battery pack while using the detector.
To Next Page
Loading...
