Copyright 2010 Baker Hughes Company.
English–PACE Indicators Instruction Manual | v
Contents
1. Description 1
1.1 Introduction 1
2. Installation 3
2.1 Package Contents 3
2.2 Packaging for Storage or Transportation 3
2.3 Preparation for Use 3
2.4 Connecting to PACE 3
2.4.1 Pressure Adaptors 4
2.4.2 Pressure Connection 5
2.5 Connecting to UUT 6
2.5.1 Pneumatic Connection 6
2.5.2 Hydraulic Connection 7
2.6 Mounting Kits 7
2.6.1 Rack-mount Option 7
2.6.2 Panel-mount Option 8
2.7 Power Connection 10
2.8 Communication Connection 10
2.8.1 RS-232 Interface 11
2.8.2 IEEE 488 Interface 12
3. Operation 15
3.1 Preparation 15
3.2 Power-up Sequence 15
3.3 Measure Mode 16
3.4 Data Logging 18
3.4.1 Measure Menu Setup 21
3.5 Operation and Example Procedures 21
3.5.1 Introduction 21
3.5.2 Measure Mode 21
3.5.3 Task 22
3.5.4 Leak Testing Option 23
3.6 Global Setup Selections 24
3.6.1 Supervisor Setup, Calibration, Save/Recall User Setup and Display 25
3.7 Supervisor Setup 26
3.8 Instrument Status 27
3.9 Software 28
4. Maintenance 29
4.1 Introduction 29
4.2 Visual Inspection 29
4.3 Cleaning 29
4.4 Test 29
4.5 Software Update 29
5. Testing and Fault Finding 31
5.1 Introduction 31
To Next Page
Loading...
