Drucker Diagnostics Horizon 12 Flex - Settings; Access the Menu; Exit the Menu

Drucker Diagnostics – Customer Service: +1-814-692-7661 – CustomerService@DruckerDiagnostics.com | Page 4
SETTINGS
ACCESS THE MENU
FROM PRESET
Access the Menu
Hold the CYCLE button until you hear a double beep. The cycle
number should begin flashing.
Enter the
Advanced Menu
Press the GEAR button to enter the advanced menu.
FROM FREE MODE
Access the Menu
Press the GEAR button.
EXIT THE MENU
FROM PRESET
Exit the Menu
Press the GEAR button, followed by the CYCLE button.
FROM FREE MODE
Exit the Menu
Press the GEAR button.