l SMS Command and Control
l Phone number call direction
l Easy enrollment with C24 Communications via VRU, web or mobile interface
Technical Specifications
The input voltage to the 3G4010 can be drawn from the UL/ULC Listed control panel or provided by an external UL/ULC Listed
power supply rated for the application (external power-limited source).
NOTE: The power supply must be Class 2, Power Limited. For residential applications a suitable power adaptor is model DSC
ADP1310-NAU or DSC ADP1320-NAU (for USA) and model DSC ADP1310-NA or DSC ADP1310-NA (for Canada).
Ratings
Power Supply Ratings
Input Voltage:
9-14Vdc (use separately listed control panel or power supply) or 13.8Vdc (use DSC
ADP1310-NAx or ADP1320-NAx power adapter)
Current Consumption
Average Current (standby with PSTN
connected):
40mA*
Average Current (standby without
PSTN connected):
55mA*
Transmission Current (no battery): 225mA*
* Plus any current drawn from the 3G4010 AUX+ terminal
Working Voltage Range
With Battery: 11-14Vdc
Without Battery: 9 -14Vdc
Battery Type:
sealed, rechargeable type, rated 12V/1.2Ah
(for 24hr standby time)
Battery charging voltage: 13.75Vdc
Battery charge current limit: 360mA
NOTE: Battery must be replaced every 3-5 years.
NOTE: When using the battery, use DSCADP 1310-NA(U) or ADP 1320-NA(U) power adapter
Operating frequency - 2G
(GSM/GPRS/EDGE):
850/1900MHz
Operating frequency - 3G
(UMTS/HSPA):
850/1900MHz
Antenna gain: 2.0dBi
Environmental Specifications
Operating temperature: 0°C-49°C (32°F-120°F)
Humidity: 93%RH Maximum (non-condensing)
Mechanical Specifications
Dimensions (metal enclosure,
painted):
138mm x 224mm x 55mm / 5.4” x 8.8” x 2.2”
Weight (without battery): 900g / 3.2oz
Simulated Telco Loop specifications (TIP/RING)
On-Hook Voltage: 12Vdc
Off-Hook Voltage (Maximum): 22Vdc
Loop Current : 25mA
Loop Resistance : 600 Ohms
Alternate construction
Dimensions (enclosure for 3G4010): 138mm x 257mm x 55mm / 5.4" x 8.8" x 2.2"
Weight (alternate construction
enclosure without battery):
1300g / 2.8lbs
5