DSC PC585 - Page 34

30
P R O G R A M M I N G W O R K S H E E T S
[014] Second System Option Code
Default Option ON OFF Section
OFF
I________I 1 Arm / Disarm Bell Squawk enabled Arm / Disarm Bell Squawk disabled 5.17
OFF
I________I 2 Bell Squawk During Auto Arm No Bell Squawk During Auto Arm 5.18
OFF I________I 3 Bell Squawk On Exit Delay No Bell Squawk On Exit Delay 5.18
OFF I________I 4 Bell Squawk On Entry Delay No Bell Squawk On Entry Delay 5.18
OFF
I________I 5 Bell Squawk On Trouble No Bell Squawk On Trouble 3.4
ON I________I 6 Audible Exit with Urgency Silent Exit Delay 5.18
OFF I________I 7 Exit Delay Termination Enabled Exit Delay Termination Disabled 5.18
OFF
I________I 8 Fire Bell is Continuous Fire Bell follows Bell Cut-off 5.13
[015] Third System Option Code
Default Option ON OFF Section
ON
I________I 1 Fire Keys Enabled Fire Keys Disabled 5.16
OFF I________I 2 Panic Keys Audible (Bell / Beeps) Panic Keys Silent 5.16
OFF I________I 3 Quick Exit Enabled Quick Exit Disabled 3.4
ON*
I________I 4 Quick Arming Enabled Quick Arming Dis. / Function keys Req. Code3.4
OFF I________I 5 Code Required For Bypassing No Code Required 3.4
OFF I________I 6 Master Code Not Changeable Master Code Changeable 5.1
ON
I________I 7 TLM Enabled TLM Disabled 5.12
OFF I________I 8 TLM Audible (Bell) When Armed TLM Trouble Beeps When Armed 5.12
* When using a PC5132 version 2.1 or older with WLS909 Wireless Keys, option [4] must be ON for the arm button to
work.
[016] Fourth System Option Code
Default Option ON OFF Section
ON
I________I 1 AC Trouble Displayed AC Trouble Not Displayed 3.4
OFF I________I 2 Trouble Light Flashes if AC Fails Trouble Light Does Not Follow AC Status 3.4
OFF
I________I 3 Blank Keypad When Not Used Keypad Active Always 5.22
OFF I________I 4 Code Required to Remove Kypd Blanking No Code Required 5.22
ON I________I 5 Keypad Backlighting is enabled Keypad Backlighting is disabled 5.23
OFF
I________I 6 Power Save Mode enabled Power Save Mode disabled 5.22
OFF I________I 7 Bypass Status Displayed While Armed Bypass Status Not Displayed While Armed 5.17
OFF I________I 8 Keypad Tampers enabled Keypad Tampers disabled 5.25
[017] Fifth System Option Code
Default Option ON OFF Section
ON
I________I 1 Unident. Wireless Key Disarm Enabled Disabled 5.17
OFF I________I 2-8 For Future Use
[020] Keypad Zone Assignments
(Section 2.12 “Keypad Zones”)
Only one keypad may be assigned to any given zone.
Default
00 I________I_______I Keypad (Slot 1) Zone Valid entries are zones 01-08
00
I________I_______I Keypad (Slot 2) Zone Valid entries are zones 01-08
00 I________I_______I Keypad (Slot 3) Zone Valid entries are zones 01-08
00 I________I_______I Keypad (Slot 4) Zone Valid entries are zones 01-08
00
I________I_______I Keypad (Slot 5) Zone Valid entries are zones 01-08
00 I________I_______I Keypad (Slot 6) Zone Valid entries are zones 01-08
00 I________I_______I Keypad (Slot 7) Zone Valid entries are zones 01-08
00
I________I_______I Keypad (Slot 8) Zone Valid entries are zones 01-08