DTS SLICE MICRO - Page 65

SLICE User’s Manual July 2017
support.dtsweb.com 65 Version 1.0i
SLICE User’s Manual
Revision History
Date
By
Description
31 July 2017
EK
Added power up procedures. Updated NANO mechanical specs and added common
signals for 16-pin Bridge. Removed reference to LABView driver. Updated datasheet
with the latest version. Updated overlooked firmware references. (Version 1.0i)
30 Nov 2015
EK
Updated to support Base+. Removed Appendix I (firmware update procedure) and
linked to Support site for latest info. Removed battery spec and added NANO IEPE.
(Version 1.0h)
30 Oct 2014
EK
Updated Tech Sppt section. Updated SLICE Distributor section, also removing
Appendix D. Removed SLICE System Interface and Appendix C. Removed Software
sections 5.3 to end. Updated ARS and Accel. Other minor changes. (Version 1.0g)
29 Nov 2012
EK
Added sections 5.2.2.3, 5.2.2.4, 5.2.3, 5.2.4. Updated LED table in Appendix D
(SLICE Distributor). Changed Scale factor EU (table) in Appendix J. Removed e-
sensing logo. (Version 1.0f)
25 Aug 2011
EK
Updated sections 2.3, 2.3.1, 2.3.3, 3.1, 3.2, 3.3.2, 3.4, 5.1, 5.2.1 and 5.2.2.
Removed section 2.3.4 (Digital SLICE) and any references. Updated options for Accel
SLICE (now section 2.3.4, was section 2.3.5). Replaced illustration in Section 4 with
one from July 2011 appendix. Removed SLICE Buyer’s Guide (was Appendix A) and
any references. Revised Appendix B (now Appendix A). Updated Appendix J (now
Appendix I) and broke out “SLICE Base Firmware Update Procedure” into separate
appendix. Added new appendix for “SLICE Control Binary File Format.” Updated
Appendix I (now Appendix H). Other minor changes were made that were not
technically significant. (Version 1.0e)
24 Feb 2011
EK
Modified sections 2.3.11 and 2.3.13. (Version 1.0d)
7 Feb 2011
EK
Added PDF bookmark for CE conformity page. (Version 1.0c)What was the Jan 2011 rev?
6 Dec 2010
EK
Updated Appendix D (SLICE System Interface (SSI). AUX connector pin assignments
completely revised (pg 2). Added SLICE mating connector P/N and removed content
on right half of page (pg 3). (Version 1.0b)
9 Aug 2010
EK
Added Declaration of CE Conformity. (Version 1.0a)
10 May 2010
EK
Initial release. (Version 1.0)