DTS XR2000 BEAM User Manual

16- PAN & TILT SPEED (default: 4)
17- FAN SPEED ( default: 5)
You can set the PAN and TILT motors at high speed on your XR2000 BEAM.
Press menu until you see PAN TILT SPEED.
Press ENTER and select a speed with UP-DOWN (there are 4 speeds). Confirm by pressing ENTER.
Fan speed regulation makes it possible to reduce fan noise. However, the ambient temperature must be
less than 35° C.
ARC 1200
19
XR2000 BEAM
CYAN PATH ALIGNMENT
Cyan excursion setting
MAGENTA ZERO ALIGNMENT
Magenta zero position setting
YELLOW ZERO ALIGNMENT
Yellow zero position setting
Calibration mode
CALIBRATION
CYAN PATH
MENU ENTER DOWN UP
MOTORS ALIGNMENT
134
CALIBRATION
MAGENTA ZERO
MENU ENTER DOWN UP
MOTORS ALIGNMENT
167
CALIBRATION
YELLOW ZERO
MENU ENTER DOWN UP
MOTORS ALIGNMENT
141
MAGENTA PATH ALIGNMENT
Magenta excursion setting
CALIBRATION
MAGENTA PATH
MENU ENTER DOWN UP
MOTORS ALIGNMENT
151
YELLOW PATH ALIGNMENT
Yellow excursion setting
CALIBRATION
MENU ENTER DOWN UP
MOTORS ALIGNMENT
121
YELLOW PATH

DTS XR2000 BEAM Specifications

General

Brand	DTS
Model	XR2000 BEAM
Category	Lighting Equipment
Language	English