DTS XR5 SPOT User Manual

8- DISPLAY FUNCTIONS
11
Up-DownMENU ENTERUp-Down
PAN MOVEMENT INVERSION
To reverse Pan movement from left
to right and vice versa
Up-Down
Counterclockwise
Clockwise
Up-DownMENU ENTERUp-Down
TILT MOVEMENT INVERSION
To reverse Tilt movement from
bottom upwards and vice versa
Up-Down
Counterclockwise
Clockwise
Up-DownMENU ENTER
DMX MODE
To select DMX mode : 21-15
channels
21 CHANNELS
(Pan & Tilt 16 bit)
15 CHANNELS
(Pan & Tilt 16 bit)
Up-Down
Up-Down
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Up-Down
MENU
ENTERUp-Down
REVERSE DISPLAY
To Reverse display's reading depending
on the mounting position
(On the ground or suspended).
Up-Down
Floor
position
Suspension
position
Up-DownENTER
Up-DownENTER
DISPLAY STAND BY
To turn off the display (after 5 seconds)
Or leave it always on.
Display OFF
Display
always ON
ENTER
ENTER
ENTER
ENTER
XR 5 SPOT
DMX IN
DMX OUT
DISPLAY
MENU
ENTER
DOWN
UP
MAINS
Electromagnetic ballast
230V 50 / 60Hz
FUSE
3,15 A
DISPLAY FUNCTIONS
The XR5 Spot display panel shows all the available functions . Using these functions, it is possible
to change some of the parameters on the unit. Changing the DTS settings can vary the functions
of the unit so that it does not respond to the DMX 512 used to control it. Carefully follow the
instructions below before carrying out any variations or selections.
NOTE: the symbol shows which key has to be pushed to obtain the desired function.
(DEFAULT)

DTS XR5 SPOT Specifications

General

Brand	DTS
Model	XR5 SPOT
Category	Lighting Equipment
Language	English