Ducati 996SPS User Manual

49
E
Chain tension inspection (fig. 34)
With the motorcycle on the side stand, the chain must
have a min. distance of 25 mm/0.98 in. from the
swingarm.
If this is not the case, contact a Ducati Dealer or
Authorized Workshop for proper chain tensioning.
Warning
Correct tightening of the eccentric hub clamping
screws is essential to rider and pillion passenger’s safety.
Important
Improper chain tension will lead to early wear of
transmission parts.
=
=
25 mm
Tensione catena (sul cavalletto laterale)
Chain tension adjustment (on side stand)
fig. 34
Chain lubrication
The chain fitted on your motorcycle has OR seals that
keep dirt out of and lubricant inside the sliding parts. The
seals might be irreparably damaged if the chain is
cleaned using any solvent other than those specific for
OR chains or washed using steam or water jets. After
cleaning, blow the chain dry or dry it using absorbent
material and apply SHELL Advance Chain or Advance
Teflon Chain on each link.
Important
Using non-specific lubricants may lead to severe
damage to chain, front and rear sprocket.

Ducati 996SPS Specifications

General

Displacement	996 cc
Bore x Stroke	98 x 66 mm
Compression Ratio	11.5:1
Transmission	6-speed
Frame	Tubular steel trellis frame
Front Tire	120/70 ZR17
Rear Tire	190/50 ZR17
Seat Height	790 mm (31.1 in)
Engine Type	Liquid-cooled, 4-stroke, L-twin cylinder, DOHC, Desmodromic 4 valves per cylinder
Power	123 hp @ 9, 500 rpm
Fuel System	Electronic fuel injection, 50 mm throttle bodies
Front Suspension	Showa upside-down fork, fully adjustable
Rear Suspension	Öhlins fully adjustable monoshock
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	220 mm disc, 2-piston caliper
Dry Weight	198 kg
Fuel Capacity	17 liters
Top Speed	270 km/h (168 mph)