Ducati 996SPS - Brakes

67
E
Rear brake
With fixed drilled steel disc.
Disc diameter:
220 mm/8.66 in.
Hydraulically operated by a pedal on R.H. side.
Braking surface:
25 sq cm/3.87 sq.in.
Make:
BREMBO
Type:
P2.105N
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11.
Warning
Brake fluid can dissolve paintwork and cause
severe eye and skin injuries in the event of accidental
spilling. Wash the affected area with abundant running
water.
Brakes
Front brake
With double floating drilled disc.
Material:
cast iron
Disc diameter:
320 mm/12.6 in.
Hydraulically operated by a control lever on right
handlebar.
Braking surface:
88 sq cm/13.6 sq.in.
Brake calipers with separate pistons.
Make:
BREMBO
Type:
30/34-4 pistons.
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 16.