Main use and
maintenance operations
"Checking coolant level and topping
up, if necessary"
Check the level according to the intervals indicated
in the tables in "Scheduled maintenance
Position the motorcycle in position,
flat.
Check that the coolant level is between the MIN and
MAX notches on the expansion reservoir side, on the
motorcycle's right side.
Top up if the level is below the MIN mark.
To top up use ENI Agip Permanent Spezial antifreeze
(do not dilute, use pure), until reaching the MAX
level.
This type of mixture ensures the best operating
conditions (the coolant to freeze at
-20 °C/-4 °F).
Cooling circuit capacity: 2.065 litres (0.45 UK gal).
Fig 236
259
To Next Page
Loading...
Need help?
General
