Brakes
Front brake
Semi-floating drilled twin-disc.
Brake calliper: Stylema M4 30 monobloc with radial
mount and 4 pistons, Bosch Cornering ABS.
Brake calliper make: BREMBO.
Calliper piston diameter: 30 mm (1.18 in).
Number of pistons per calliper: 4.
Disc diameter: 330 mm (12.99 in).
Disc thickness: 5 mm (0.19 in).
Disc thickness shall not be below the following value
at max wear conditions: 4.5 mm (0.17 in).
Disc braking 303.6 cm
3
(18.52 in
3
).
Disc braking material: stainless steel.
Plate carrier material: aluminium, painted black.
Hydraulically operated by a control lever on
handlebar right-hand side.
Brake lever adjustment: with screw.
Brake lever type: radial and adjustable.
Friction material make: TOSHIBA.
Friction material: BRM 10 A HH.
Brake master cylinder type: PR16/19.
Brake lever master cylinder diameter: 16 mm (0.62
in).
Rear brake
With fixed drilled stainless steel disc.
Brake calliper: floating calliper with 2 pistons [ABS
Cornering].
Brake calliper make: BREMBO.
Calliper piston diameter: 30 mm/32 mm (1.18/1.25 in).
Disc diameter: 265 mm (10.43 in).
Disc thickness: 6 mm (0.23 in).
Disc thickness shall not be below the following value
at max wear conditions: 5.5 mm (0.21 in).
Disc braking 240.4 cm
3
(14.67 in
3
).
Hydraulically operated by a pedal on RH side.
Friction material make: TOSHIBA.
Friction material: TT 2182 FF.
Brake master cylinder type: PS13.
Brake lever master cylinder diameter: 13 mm (0.51
in).
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the area with abundant running water.
301
To Next Page
Loading...
Need help?
General
