Front brake lever
Pull in the lever (1) towards the handgrip to operate
the front brake. The system is hydraulically operated
and you just need to pull the lever gently.
The brake lever (1) has a dial (2) for adjusting the
distance between lever and handgrip on the
handlebar.
To adjust the distance between the lever and the
handgrip, rotate the knob (2) by the desired number
of clicks. Working from the front of the bike, turn the
knob (2) clockwise to move the lever away from the
handgrip and anticlockwise to move the lever closer
to the handgrip.
Fig 80
98
To Next Page
Loading...
Need help?
General
