lubrication, wait 10-15 minutes to allow the
lubricant to act on the internal and external
of the chain and then remove the excess lubricant
with a clean cloth.
Do not use the motorcycle immediately
lubricating the chain as the lubricant, still fluid,
would be centrifuged outwards causing possible
soiling of the rear tyre or the rider's footpeg.
Check the chain taking care to lubricate
it, as also indicated in the table below: at least every
1000 km (621 mi) or more frequently (about every
400 km (248 mi)) when using the bike with high
outside temperatures (40°C) or long travels on
the highway at high speed.
Fig 252
275
To Next Page
Loading...
Need help?
General
