Warning
Failure to carry out these checks before riding, may lead to motorcycle damage and injury to rider.
Before riding, perform a thorough check-up on your bike as follows:
Fuel level in the tank
Check fuel level in the tank. Fill tank if needed (Sect. C 2,
Fuels and lubricants).
Engine oil level
Check oil level in the sump through the sight glass. Top up with recommended oil if needed (Sect. C 2,
Fuels and lubricants).
Brake and clutch fluid
Check fluid level in the relevant reservoirs.
Tyre condition
Check tyre pressure and condition (Sect. C 1.1,
Front wheel/Rear wheel).
Controls
Work the brake, clutch, throttle and gear change controls (levers, pedals and twistgrips) and check for
proper operation.
Lights and indicators
Make sure lights, indicators and horn work properly. Replace any burnt-out bulbs (Sect. C 1.1,
Lights /
instrument panel).
Key-operated locks
Check that fuel filler plug and seat catch locks are closed firmly.
Side stand
Check the side stand for operation (Sect. P 6,
Protection and safety devices) and correct position
(Sect. H 5,
Stands).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_D_1_5_00.15.1.html (2 of 2) [10/7/2008 8:42:26 PM]
To Next Page
Loading...
