Refit the neutral light switch (19) with seal (20) and tighten to the specified torque (Sect. C 3, Engine torque
settings).
Apply threadlocker to the plug (27), fit the seal, start it in its thread and tighten it to the specified torque (Sect. C 3,
Engine torque settings).
Refit mesh filter (18) with seal, as described in Sect. D 4, Changing the engine oil and filter cartridge.
Refit the ratchet and gear stopper (Sect. N 7.1,
Reassembling gear stopper and ratchet).
To refit stud bolts (12) on casing, apply speed bond on threads and tighten to the specified torque (Sect. C 3,
Engine
torque settings). Use the suitable tool (shown).
Operations Reference See Section
Refit the cylinder-piston assemblies N 5,
Refitting cylinder / piston assy
Refit complete head assembly and
timing system parts
N 4.2,
Cylinder heads: side covers /
timing system
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_9A9_00.73.1.html (6 of 10) [10/7/2008 8:46:24 PM]
To Next Page
