E
24
Rear brake pedal (fig. 15)
Push down on the pedal (1) with your foot to operate the
rear brake.
The system is controlled hydraulically.
Gear change pedal (fig. 16)
The gear change pedal has a central position N, with
automatic return, and two directions of movement:
down = push down on the pedal to engage 1
st
gear and
to shift down. When this is done, the N light on the
instrument goes off;
up = lift the pedal to engage 2
nd
gear and then 3
rd
, 4
th
, 5
th
and 6
th
gears.
Each time you move the pedal you engage the next gear,
one gear at a time.
1
fig. 15
1
2
3
4
5
6
N
fig. 16