E
69
Brakes
Front
Type:
drilled steel.
2 disks.
Disk diameter:
300 mm.
Hydraulically operated by a control lever on right
handlebar.
Braking surface, cm
2
:
44 per disk
Differential piston brake callipers.
Make and type:
BREMBO PF2x28 2 pistons.
Friction material:
FERIT I/D 450 FF.
Master cylinder type:
PS 15.
Rear
Type:
with fixed drilled steel disk.
Disk diameter:
245 mm.
Hydraulically operated by pedal on R.H. side.
Braking surface:
25 cm
2
.
Brake calliper:
cylinder dia. 32 mm.
Make and type:
P 32 F
Friction material:
FERIT I/D 450 FF.
Master cylinder type:
PS 11 B.
Warning
The brake fluid used in the brake system is corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
To Next Page