E
22
Right switch (fig. 14.1)
1) Two-position ENGINE STOP switch:
position (RUN) = run;
position (OFF) = stop engine.
Warning
This switch is mainly intended for use in
emergencies when you need to stop the engine quickly.
After the engine is stopped, return the switch to
position to allow the motorcycle to be started again.
Important
Travelling with the headlamp on, switching off the
engine with switch (1) and leaving the ignition key in the ON
position can drain the battery, as the headlamp remains on.
2) Button = engine start.
1
2
fig. 14.1
To Next Page
Loading...
