Ducati ST3 - Front Fork Adjusters (ST3)

E
46
Front fork adjusters (ST3)
The fork of this vehicle is adjustable in the preload only.
Adjustment is carried out through the rebound adjuster:
1) (fig. 37) to adjust spring preload.
Standard setting:
spring preload (A, fig. 37): 16 mm
Range of adjustment:
spring preload (A, fig. 37): 10 - 25 mm
To change the preload of the spring inside each fork leg
turn the hex. adjuster (1) with a 22-mm hexagon wrench.
Important
Adjust both fork legs to same settings.
1
A
fig. 37