Ducati ST3 - Suspensions; Exhaust System; Available Colours

E
100
Suspensions
Front
Hydraulic upside-down fork, with preload adjuster for leg
inner springs.
Stanchion diameter:
43 mm
Travel along leg axis:
130 mm
Rear tyre
Of the progressive type, thanks to a rocker arm connecting
frame and upper pivot point of the shock absorber. The
shock absorber - with separated reservoir - enables the
adjustment of rebound and compression damping and
spring preload. At the bottom pivot point it is connected to
a steel swingarm. The swingarm hinges on a pivot pin
passing through the engine. The whole system gives the
bike excellent stability.
Travel:
65 mm
Rear wheel travel:
148 mm
Exhaust system
Equipped with catalytic converter in compliance with
EURO 3 emission regulations.
U.S.A. version: not catalysed
Available colours
Ducati anniversary Red F_473.101 (PPG) (excluded
California, Canada, Japan);
red frame, black wheel rims and conveyors.
Ducati metal dark grey 653.6047 (excluded California,
Canada, Japan);
metal-colour frame and red rims; silver air scoops and
colour-matched tank protector.
Shining black 248.514 (PPG) (California, Canada, Japan
only);
black frame, metal-colour wheel rims, colour-matched
conveyors.