E
59
Starting the engine
Warning
Before starting the engine, become familiar with the
controls you will need to use when riding.
1) Move the ignition key to ON (fig. 50). Make sure both
the green light N and the red light on the instrument
panel come on.
Important
The oil pressure light should go out a few seconds
after the engine has started (page 15).
Note
It is possible to start the engine with side stand down
and the gearbox in neutral. When starting the bike with a
gear engaged, pull the clutch lever (in this case the side
stand must be up).
ON
fig. 50
To Next Page
Loading...
