Soft Serve Freezer Model GES-102
iv 184559
Safety Decal Locations
For factory service assistance, contact H.
C. Duke & Son, LLC, Service Department
by phone or FAX:
Phone: (309) 755-4553
(800) 755-4545
FAX: (309) 755-9858
E-mail: service@hcduke.com
(The decals on the next page are
numbered 1, 2, 3, and 4. Those numbers
correspond to the numbers in the table
below. The table provides the part
number, description, and quantity for each
decal.)
Do not attempt to operate the freezer
until all safety precautions and operating
instructions in this manual are read and
understood.
Take notice of all warning, caution,
instruction and information decals (or
labels) on the freezer as shown in the
gure on the next page. The labels have
been put there to help maintain a safe
working environment.
The labels have been designed to
withstand washing and cleaning. All labels
must remain legible for the life of the
freezer. Check labels periodically to be
sure they can be recognized as warning
labels.
If it is necessary to replace any label,
please contact H.C. Duke & Son, LLC
When ready to order you will need to
determine the (1) part number, (2) type of
label, (3) location of label, and (4) quantity
required, and include a return shipping
address.
1 HC165025 Decal-Beater Warning (1)
2 HC165246 Decal-Pressurized System (3)
3 HC165126 Decal-Panel Removal Warning (1)
4 HC165048 Decal-Warning Rotating Parts (2)
No. Part No. Description
To Next Page
Loading...