2
Installation and Operation of: Tri-Channel Cold Pan
IMPORTANT SAFETY INSTRUCTIONS
Throughout this manual, you will nd the following safety words and symbols that signify
important safety issues with regards to operating or maintaining the equipment.
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Indicates Important Information
Indicates electrical shock hazard which, if not avoided, could
result in death or serious injury and/or equipment damage.
Indicates hot surface which, if not avoided, could result in
minor or moderate injury.
TABLE OF CONTENTS
Important Safety Instructions .......................................................................................................... 2-4
Wire Diagram ......................................................................................................................................... 5
Specications .................................................................................................................................... 6-7
Inspection and Unpacking ..................................................................................................................... 8
Tools and Parts ...................................................................................................................................... 9
Installation of Tri Channel Cold Pan
I. Unit Placement and adjustment.................................................................................................. 10
II. Installation and adjustment of end glass (adjacent units) ............................................................ 11
III. Installation and adjustment of end glass (end of line) ............................................................... 12
IV. Adjusting Front Glass ................................................................................................................ 13
Operations Instructions
I. General Information ..................................................................................................................... 14
II. General Cleaning Instructions .................................................................................................... 14
III Polyethylene Cutting Boards ...................................................................................................... 14
IV General Operating Instructions .................................................................................................. 14
Preventive Maintenence
Cleaning the condenser coil ........................................................................................................... 15
Troubleshooting ................................................................................................................................ 16
Electrical shock hazard. Do not wash with water jet or hose.