1.9 USING THE MACHINE
1.
Take hold of the handle and lower it slowly to one of the two
sides. The machine will start up and the brushes will start
revolving on the floor (figure “1.12”) .
2.
Move the machine slowly forwards, going over the same
washing path with the recovery device MU (MOP UP)
engaged (figure “1.10”).
3.
Dispense the liquid by activating the lever underneath the
handle at brief intervals and only when the machine is moving
forwards, taking care not to flood the floor.
Figure 1.12
The dirty water will be collected instantly inside the recovery
tank which must be emptied as soon as it fills up removing it
from its seat (figure “1.13”) .
Figure 1.13
WARNING
The disposal of the dirty water must be carried out in compliance with
the regulations in force.
To Next Page
Loading...
