1.15 AUTOMATIC MOTOR PROTECTION "MOTOR PROTECTOR"
The “Motor Protector” is a safety device which
stops the machine in case conditions occur
that overload the electric motor (e.g. foreign
bodies caught in the brushes which can
prevent their rotation, poor supply of power,
MU RT
overheating, etc.).
Figure 1.19
WARNING
Disconnect the machine from the power socket before removing any
foreign
bodies caught in the brushes.
After checking and removing the cause which led to motor overload, press the “Motor Protector”
button (after about 60 seconds) to restore machine operation.
To Next Page
Loading...
