Duplo 660P User Manual

Press the cursor, cuts memory screen appears, make the fifth cut
say12.000, press ,, the screen will change to:

After finish the setting, press , it beeps pi-pi-pi three
times, repress at once and it will beep 3 times to store the
program, the flashing cursor will be back to the first cut position.
If you want to get into auto cut, press , backgauge will move to
the 1
st
cut position and the following screen appears:
How to use the Cut & Store (existing) Program
Turn on the power to the cutter, press wait until the back
gauge moves back and recalibrates the position, the following
screen appears, you can operate the Mark VII.
Press Pro, cuts memory screen appears, select a program number
from 1-500. Press to enter the program number.
~ 43~
~44~
26.000
0 0
0.000
26.000
0 0
0.000
5
26.000
9 6
15.000
－ 3.000
－ 0.020
× 5.000
12.000
0.000
0.000
0.000
0.000
0.000
18.000
9 1
15.000
－ 3.000
－ 0.020
× 0.000
0.000
0.000
0.000
0.000
0.000
0.000
18.000
－ 3.000
－ 0.020
× 5.000
12.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
18.000
－ 3.000
－ 0.020
× 5.000
12.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000

Duplo 660P Specifications

General

Brand	Duplo
Model	660P
Category	Paper Cutters
Language	English