Operating Your Notebook
EN-23
Configuring the Touchscreen Settings
Your notebook is equipped with a touchscreen. Using the touchscreen, you can
navigate the screen by using touch gestures (any input from your finger, a glove, or
a stylus).
CAUTION!
Do not use any sharp objects, such as a pen or pencil, on the touchscreen to
prevent scratches.
NOTE
An optional protective film has been attached to the screen before shipment.
You should change the film when it gets worn out.
You can select the desired touch screen mode in the Quick menu.
Select one of the available options:
: Select Finger/Water if you are using your fingertips.
: Select Glove if you are wearing gloves.
: Select Stylus if you are using a stylus.
: Select Disable to disable the touch function.
NOTE
If the touchscreen mode is set to Glove or Stylus and the touchscreen is wet
(i.e. from a spilled liquid), the touch function will not respond to any input.
Make sure to keep the screen dry to ensure proper operation.
If you assign the P2 button as Touch Screen Mode (refer to page 21), you
can easily switch the touchscreen mode by simply pressing the P2 button.
To Next Page
Loading...