Operating
AC
Appliances
Operating
Several
Appliances
at
Once
You can run several
AC
appliances
if
the total rating
of
all the
appliances (in watts) does
not
exceed 240
W.
Run time,
however, will decrease accordingly with the number
of
appliances being operated and the AC
power
being
consumed.
Operating
an
AC
Appliance
Before operating
your
AC
appliance, ensure that the battery
of
the Duracell® Powerpack is fully charged. See
"Recharging with the
AC
Charger"
on
page
11
for details.
To
operate an AC appliance:
1.
Tum
the
AC
Power
ON/OFF switch to the ON position.
The switch illuminates to indicate AC
power
is available
at the
AC
power
outlets.
2.
Open
the protective cover
on
the
AC
power outlets.
3. Plug the
AC
appliance into an AC power outlet and
tum
the appliance on. Duracell® Powerpack will operate
most devices rated up to 240
W.
4. Recharge the Duracell® Powerpack as soon as possible
after each use.
In the event
of
an
overload, low battery voltage
or
overheating, the Duracell® Powerpack automatically shuts
down.
17
To Next Page
Loading...
Need help?
General
