Recharging the Duracell® Powerpack Battery
4. Plug the AC charger into a standard AC wall outlet.
5.
While the Duracell® Powerpack
is
recharging, the
Battery Status LED
is
red.
If
the Duracell® Powerpack is
completely discharged, a typical recharge may take up to
24 hours. When fully charged, the Battery Status LED
changes to green and the Duracell® Powerpack is ready
to use.
Important: The 24-hour charging time for the Duracell®
Powerpack assumes that there is 120 V at the AC wall outlet.
If
the voltage is less than 120 V AC, it may take more than 24 hours
to fully recharge the Duracell® Powerpack. If, after 24 hours
of
charging, the Battery Status LED is still red, continue to charge
the unit for another
12
hours. The Duracell® Powerpack will be
~~_~9-~_~~r
use
__
~_~_~E:_iK!~~
__
~~!!~~
__
~_t~~~_!:-_~_I?_!~~~~~_!~~-:
_
Once the Duracell® Powerpack
is
fully charged, the charging
voltage and current automatically reduces to a maintenance
level and the Duracell® Powerpack may be left permanently
connected to the AC charger.
If
your utility power
is
interrupted, the charging process automatically restarts when
power returns.
Recharging
with the·
DC
Charging
Cable
Using the DC charging cable, the Duracell® Powerpack can
be recharged while you drive your vehicle.
Important: Although the charge regulation circuitry in the
Duracell® Powerpack does not operate with this charging method,
most vehicle voltage regulators will ensure that the Duracell®
Powerpack is not overcharged.
Note: The Battery Status LED will not illuminate when the
Q_'l.lra~~ll®
_~owe!Jla~~l~!~~~~rg_~~~~~n!L~~~~hargi.!1g
~_~~!~_
-----------------~-----
WARNING:
Fire
and
explosion
hazard
Do not use this recharging method
if
your vehicle has abnormally
high voltage electrical systems that operate above
15
V DC. This
may lead to accumulations
of
hydrogen, causing exposure to fire
and explosion hazard.
30
To Next Page
Loading...
Need help?
General
