EasyManuals Logo

Duracell POWERPACK300 User Manual

Duracell POWERPACK300
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Recharging the Duracell® Powerpack Battery
--
..
-
..
Recharging
with a Generator's
Regulated
12
V
DC
Outlet
WARNING:
Fire
and
explosion
hazard
The generator output must be intended for battery charging and
have an output
of
15
V or less. An unregulated output or one that
exceeds
15
V DC can damage the battery.
This may lead to accumulations
of
hydrogen, causing exposure to
fire and explosion hazard.
Refer to the Owner's Guide accompanying your generator for
detailed instructions on connecting the generator to a unit like
the Duracell® Powerpack.
You can recharge the Duracell® Powerpack using a
generator in several ways:
Using a generator that has an auxiliary regulated
12
V DC output designed for charging
12
V DC
batteries. Most generators are equipped with them. Use
this power source for faster charging.
Using a generator with a regulated
12
V DC lighter
socket. Follow the connection instructions in
"Recharging with the DC Charging Cable" on page 30.
Using the AC charger to recharge the Duracell® Powerpack
from a generator is possible, but would require extended
generator running time.
Most
of
the Duracell® Powerpack's battery capacity will be
recharged in a few hours.
Note: The Battery Level LEDs are only accurate when the
Duracell® Powerpack has been disconnected from all appliances
and all charging sources for
15
minutes.
32

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Duracell POWERPACK300 and is the answer not in the manual?

Duracell POWERPACK300 Specifications

General IconGeneral
BrandDuracell
ModelPOWERPACK300
CategoryPortable Generator
LanguageEnglish

Related product manuals