R
DURASTAR.COM
13
NOTE
You cannot adjust the temperature in FAN mode. As a result, your remote control's LCD
display will not display a temperature.
FAN ( )
In FAN mode, the temperature cannot be set and no temperature will be displayed on the remote
screen.
MODE
1. Select FAN mode 3. Turn on air conditioner2. Set fan speed
NOTE
Two or more indoor units can be operated by one outdoor unit. However, two or more
indoor units cannot operate simultaneously when different operating modes have been
selected. If COOL/DRY/FAN is selected with one or more indoor units and HEAT with
another, the unit(s) in HEAT has priority.
NOTE
As outdoor temperature drops, the performance of your unit’s HEAT function may be
affected.
ADVANCED BUTTONS AND FEATURES
ECO/GEAR ( )
The ECO/GEAR feature provides three levels of energy saving options. ECO/GEAR is only
available in COOL mode. Some of these options may result in insufficient cooling in circumstances
of high ambient heat. The ECO/GEAR feature is not available in multiple zone configurations.
ECO ( )
While the unit is in COOL mode, press the ECO/GEAR button once. If the set temperature is
above 75°F (24°C) the FAN speed will be set to AUTO. If the set temperature is below 75°F (24°C)
it will automatically be adjusted to 75°F (24°C) and the FAN speed will be set to AUTO. When
functioning in this mode, the unit can reduce its energy consumption up to 10%. Press the ECO/
GEAR button to turn off this feature.
GEAR ( )
GEAR has two levels - 25% and 50% energy consumption. While the unit is in COOL mode,
press the ECO/GEAR button twice (x2) within two (2) seconds to select 25% or three times (x3)
to select 50%. If the set temperature is above 75°F (24°C) the FAN speed will be set to AUTO. If
the set temperature is below 75°F (24°C) it will automatically be adjusted to 75°F (24°C) and the
FAN speed will be set to AUTO. When functioning in these modes, the unit can reduce its energy
consumption up to 25% or 50%. Press the ECO/GEAR button to turn off this feature.
NOTE
The overall energy consumption of the unit is affected by many factors and this feature's
energy reduction level setting will not result in directly proportional money savings on your
energy bill.
To Next Page
Loading...
