58
Rearwash/Ladywash
Switching between
the Rearwash and
Ladywash takes too
long.
When switching
between Rearwash and
Ladywash, the spray
wand moves back and
then forward again after
self-cleaning is
complete.
This is normal.
The water spray
intensity is too weak.
The water spray intensi
-
ty has been set to "Low".
> Adjust the water spray
intensity to
“
Medium“ or
“
High“.
7.3
The water supply hose
has buckled.
> Contact your installer.
The water spray
intensity is not stable.
The water filter is
clogged.
> Clean the water filter.
8.6
The water tempe-
rature is not warm
enough.
The water temperature
has been set to "Off" or
"Low".
> Adjust the water tempera
-
ture to
“
Medium“ or
“
High“.
7.3
The water tempera-
ture is not stable.
The water filter is
clogged.
> Clean the water filter.
8.6
The water spray
from the spray wand
suddenly stops.
The function automa
-
tically stops after 3
minutes.
This is normal.
The seat sensor is losing
contact with the user
more frequently.
> Sit down again and press
the Rearwash/Ladywash
button once again.
A jet of water is not
emerging from the
spray wand.
The seat sensor is not in
contact with the user.
> Sit down and carry out the
function required.
The spray nozzle is
clogged.
> Clean the spray nozzle.
8.1
Problem Potential cause Solution Ch.
EN
To Next Page
Loading...
