7.2 V820 Operating Panel Keys
Key Function Settings
P Start or end programming mode
E Confirm a parameter-value change
+ Increase a displayed parameter value
- Decrease a displayed parameter value
1 Starting bar tack or starting stitch condensation single / double / off
2 Seam stitch counting forward / reverse / off
3 Light barrier function bright-dark / dark-bright/
off
3 Auto foot lift after thread trimming on / off
4 Ending bartack single / double / off or
ending stitch condensation
5 Thread cutter/thread wiper thread cutter/thread cutter
and thread wiper / off
6 Auto foot lift on stop in mid-seam on / off
Auto foot lift after thread trimming on / off
7 Basic needle position position 1 / position 2
8 Bobbin thread monitor on / off
9 Key function programmable
0 Teach in / sew stored sewing program
22
To Next Page
Loading...
Need help?
General
